Model Number: DLD-S2851
Key Specifications/Special Features:
Specification:① Power: D.C 6V/AC 220v② Power consumption in static:≤0.5mW(d.c)/≤0.6w(a.c.)③ Ambient temperature: 0 - 55℃④ Suitable water pressure: 0.05MPa - 0.6MPa⑤ Detection zone: 5-20cm(to Standard White Board)⑥ Dia. of inlet/outlet pipe: (DN15)G1/2″⑦ With water temperature mixer⑧Standard: CJ/T194-2004Features & functions:Dual infrared sensor:There are two sensors: upper sensor & lower sensor.The lower sensor will flush automatically when the user’s hands enter the sensing range, the upper sensor will flush automatically at first induction and will stop at the second induction.This feature is suitable for collecting water or making the water being on for a while.
Temp. adjustable:water temperature could be adjusted with the regulating handle.
Easy to install:it is integrative design, no need to install the control box.
Easy to maintain:non-professional person can maintain the faucet easily with its built-in filter.
Sensing distance self-adjusting: the sensor starts to self-adjust the sensing distance and the indicator will flash on for 3s when the power is on. (Note: no object is allowed to move in front of the sensor eye.)
Built-in check valve:set check valve in both cold and hot water pipe to avoid cold & hot water swapping.
Power saving: 4pcs AA alkaline batteries can last 2 years based on 300 cycles a day.
Water saving & hygienic:without human operation, flushing action is done by machine automatically, effectively eliminate the bacteria infection.
Overtime protection:it will stop flush automatically after 60s flowing ( 180s for the upper sensor) and restore to normal in 10s. This feature set is effective to avoid the waste of water resources caused by misoperation.
Power insufficient reminder: when batteries run out, the indicator will flash to remind you to change new batteries.
Use Instructions:
①Water flows out automatically once you put your hands in the detection zone.
②Water stops automatically once you draw your hands back.
③Water will flow on with activating the sensor (facing up); water stop automatically at the 2nd activate( facing up)
④Adjust the water temperature as picture shown.
By certification [File Integrity]
